Tool Case
The Swagelok® Tool Case
The Swagelok tools you need all in one durable, easy-to-carry case!
Swagelok Kansas City | Little Rock | Omaha | Quad Cities now offers a secure case for your Swagelok tools. The case contains Tube Benders, Gap Inspection Gauges, Tee, Pre-Swaging Tools, Tube Cutters, and Tube Deburring Tools. Also, every case comes with Swagelok’s Tube Fitter’s Manual for no extra charge. This manual is a valuable resource for anyone involved in tubing selection and/or installation of Swagelok fittings.
All of the tools are contained within a rugged, water resistant case that is easy transport to your next project.
Case includes the following Swagelok Tools:
Tube Fitter's Manual
Contains information such as troubleshooting, tubing specifications, and pressure ratings. Includes information on selecting tube fittings for severe service requirements, metallurgy, innovations in product design, and advanced manufacturing processes.
MS-13-03
Gap Inspection Gauge
Swagelok gap inspection gauges assure the installer or inspector that the fitting has been sufficiently pulled up on initial installation.
MS-IG-468
Tube Cutter
The Swagelok tube cutter cuts stainless steel, soft copper, and aluminum tubing from 3/16 to 1 in. and 6 to 25 mm outside diameter.
MS-TC-308
Tube Deburring Tool
After use of the tube cutter or tube sawing guide, Swagelok deburring tools deburr stainless steel, steel, and hard alloy tube ends.
MS-TDT-24
Hand Tube Benders
Swagelok hand tube benders provide consistent, high-quality bends in tubing made from materials that can be used with Swagelok tube fittings.
1/4" - MS-HTB-4T | 3/8" - MS-HTB-6T | 1/2" - MS-HTB-8
Preswaging Tools
For Swagelok tube fitting installations in close quarters, the Swagelok preswaging tool is a convenient accessory.
1/4" - MS-ST-400 | 3/8" - MS-ST-600 | 1/2" - MS-ST-810
Tee Wrenches
The tee wrench provides positive backup support when installing Swagelok union tees and crosses.
1/4" - MS-TW-4 | 3/8" - MS-TW-6 | 1/2" - MS-TW-8